Today, more than ever, you need reliable
and easy to use products from a trusted partner
who understands your sterilization needs.
The Midmark M9 UltraClave® Automatic
Sterilizer was specifically designed and engineered
to meet those needs.
Click for BEST PRICE
Create peace of mind by making the
healthcare market’s leading autoclave... the
Midmark M9 UltraClave... your preferred office
choice.
Pouch Rack
1 pouch rack
Convenience at a glance.
The LCD display indicates cycle selected, cycle
temperature and exposure time.
When the cycle enters sterilization mode and dry
mode, the remaining cycle time is displayed as
well as temperature and pressure.
No more wet instruments.
Once the sterilization is complete, the door opens
automatically and quietly to dissipate steam and
dry your instruments.
You’ll have dry, sterile instruments every time.
Safety features.
If the door is not closed completely or the
reservoir water level is low, the LCD display will
provide the appropriate message.
In either case, sterilization can’t continue until
you’ve attended to the unit.
Ease of draining & filling.
For ease of draining and filling, the Midmark M9’
s reservoir fill port and drain tube are in the front
of the unit, not on top or in back.
Optional printer accessory.
The Midmark M9 printer accessory provides a
permanent record of cycles, times, temperatures
and pressures during a cycle.
Self Program Controls
Programmable controls allow for creation of
different cycle parameters for special sterilization
needs.
Programmable buttons allow you to change the
following:
Time (3 to 90 minutes),
Temperature (230 to 275˚F),
Dry Time (0 to 60 minutes), or
Vent (slow or fast).
The #1 and #2 buttons allow you to store the
change if desired.
Pre-Programmed Controls
Four pre-programmed sterilization cycle controls:
Unwrapped (132º C or 270º F for 3 minutes),
Pouched (132º C or 270º F for 5 minutes),
Packs (121º C or 250º F for 30 minutes),
Handpiece (unwrapped and pouched)
(132˚ C or 270˚ F for 6 minutes).
The Midmark M9D AutoClave®
Automatic Sterilizer
Offers easy, effective sterilization but without the
convenience of a door that opens automatically.
One button starts the cycle... but at the end of the
automatic sterilization process, you need to
manually open the door within 30 minutes of
completion to activate the dry cycle.
This extra step is the only physical difference
between the Midmark M9D and its automatic
counterparts.
Click for BEST PRICE
and easy to use products from a trusted partner
who understands your sterilization needs.
The Midmark M9 UltraClave® Automatic
Sterilizer was specifically designed and engineered
to meet those needs.
Click for BEST PRICE
- The intuitive display and simple prompts
help you easily select the cycle you need...
whether it is for unwrapped items, pouches,
packs or handpieces. - Once the sterilization process is complete,
the door conveniently opens automatically
and quietly to dissipate the steam and
provide fast and efficient drying time of
your instruments.
Create peace of mind by making the
healthcare market’s leading autoclave... the
Midmark M9 UltraClave... your preferred office
choice.
Pouch Rack
1 pouch rack
Convenience at a glance.
The LCD display indicates cycle selected, cycle
temperature and exposure time.
When the cycle enters sterilization mode and dry
mode, the remaining cycle time is displayed as
well as temperature and pressure.
No more wet instruments.
Once the sterilization is complete, the door opens
automatically and quietly to dissipate steam and
dry your instruments.
You’ll have dry, sterile instruments every time.
Safety features.
If the door is not closed completely or the
reservoir water level is low, the LCD display will
provide the appropriate message.
In either case, sterilization can’t continue until
you’ve attended to the unit.
Ease of draining & filling.
For ease of draining and filling, the Midmark M9’
s reservoir fill port and drain tube are in the front
of the unit, not on top or in back.
Optional printer accessory.
The Midmark M9 printer accessory provides a
permanent record of cycles, times, temperatures
and pressures during a cycle.
Self Program Controls
Programmable controls allow for creation of
different cycle parameters for special sterilization
needs.
Programmable buttons allow you to change the
following:
Time (3 to 90 minutes),
Temperature (230 to 275˚F),
Dry Time (0 to 60 minutes), or
Vent (slow or fast).
The #1 and #2 buttons allow you to store the
change if desired.
Pre-Programmed Controls
Four pre-programmed sterilization cycle controls:
Unwrapped (132º C or 270º F for 3 minutes),
Pouched (132º C or 270º F for 5 minutes),
Packs (121º C or 250º F for 30 minutes),
Handpiece (unwrapped and pouched)
(132˚ C or 270˚ F for 6 minutes).
The Midmark M9D AutoClave®
Automatic Sterilizer
Offers easy, effective sterilization but without the
convenience of a door that opens automatically.
One button starts the cycle... but at the end of the
automatic sterilization process, you need to
manually open the door within 30 minutes of
completion to activate the dry cycle.
This extra step is the only physical difference
between the Midmark M9D and its automatic
counterparts.
Click for BEST PRICE
Specifications
Overall length w/plug: 20.13" (51 cm)
Overall width: 15.3" (38.9 cm)
Overall height w/printer: 15.8" (40.1 cm)
Countertop area:
15.3" x 20.38" (38.9 cm x 51.8 cm)
Chamber:
9" diameter (22.9 cm)
15" depth (38.0 cm)
3.5 gal. usable volume (13.4 liters)
Trays:
Two large – 7 5/16" W x 12" L x 7/8" D (18.6 cm x 30.5 cm x 2.2 cm)
Two small – 5 5/8" W x 12" L x 7/8" D (14.3 cm x 30.5 cm x 2.2 cm)
Unit weight: 73 lbs. (33.1 kg)
Shipping weight: 81 lbs. (36.7 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters)
Electrical Requirements
115 VAC, 50/60 Hz, 15 AMPS Single Phase
115 VAC has 1425-watt tubular immersion heater
230 VAC, 50/60 Hz, 10 AMPS Single Phase
230 VAC has 1500-watt tubular immersion heater
UL61010A-1, UL61010A-2-041
CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041 96
A separate (dedicated) circuit is recommended for this sterilizer
Meets the requirements of ASME Boiler and Pressure Vessel Code
Optional Accessory
9A259001 - Impact Dot Matrix Printer
9A224001 - Sterilizer Deep Tray
9A226001 - Sterilizer Pouch Rack
9A307001 - Cool Hand Tool (Tray & Cassette Removal Tool)
9A260001 - External Condensing Tank
Installation
Use on Formica®, stainless steel or stone surface.
Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill reservoir and for
cooling processed trays.
Overall length w/plug: 20.13" (51 cm)
Overall width: 15.3" (38.9 cm)
Overall height w/printer: 15.8" (40.1 cm)
Countertop area:
15.3" x 20.38" (38.9 cm x 51.8 cm)
Chamber:
9" diameter (22.9 cm)
15" depth (38.0 cm)
3.5 gal. usable volume (13.4 liters)
Trays:
Two large – 7 5/16" W x 12" L x 7/8" D (18.6 cm x 30.5 cm x 2.2 cm)
Two small – 5 5/8" W x 12" L x 7/8" D (14.3 cm x 30.5 cm x 2.2 cm)
Unit weight: 73 lbs. (33.1 kg)
Shipping weight: 81 lbs. (36.7 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters)
Electrical Requirements
115 VAC, 50/60 Hz, 15 AMPS Single Phase
115 VAC has 1425-watt tubular immersion heater
230 VAC, 50/60 Hz, 10 AMPS Single Phase
230 VAC has 1500-watt tubular immersion heater
UL61010A-1, UL61010A-2-041
CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041 96
A separate (dedicated) circuit is recommended for this sterilizer
Meets the requirements of ASME Boiler and Pressure Vessel Code
Optional Accessory
9A259001 - Impact Dot Matrix Printer
9A224001 - Sterilizer Deep Tray
9A226001 - Sterilizer Pouch Rack
9A307001 - Cool Hand Tool (Tray & Cassette Removal Tool)
9A260001 - External Condensing Tank
Installation
Use on Formica®, stainless steel or stone surface.
Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill reservoir and for
cooling processed trays.
| The Midmark M7 self-contained steam autoclave makes sterilization quick and efficient. Chamber: 7.5" diameter (19.1 cm) x 15" depth (38.1 cm) |
| The Midmark M11 UltraClave Create peace of mind by making the healthcare market’s leading autoclave... Your preferred office choice. Chamber: 11" diameter (28 cm) x 18" depth (46 cm) |
 | |  | |  | |  | |  | |  | |  |
| Midmark Speed~Clean Autoclave Cleaner Click HERE to Order |
| MIDMARK...is one of America's most popular Sterilizer Manufacturers. Their products are easy to use and durable. ~~~~~~~~~~~~~~~~~~~~~ We searched the Internet for MIDMARK Prices and... ...can certainly do way better than anyone...even the Discount Houses! Just Call Pete Hampton Toll-Free & DIRECT at 1-888-398-7837 ext 102 ~~~~~~~~~~~~~~~~~~~~~ We NEVER share your contact information with anyone and... ...we NEVER push anyone for a sale, because... We KNOW we can always get you better pricing, better service and better terms than our competition. |
////////////////////////////////
 | |  | |  | |  | |  | |  | |  | |  |
| | HOME PAGE | All American | Barnstead | Castle | ChemiClave | Delta XL | Harvey | | Hirayama | Hospital Sterilizers | MagnaClave | Market Forge | MDT | Midmark | | Pelton & Crane | Prestige | Ritter | Statim | Tuttnauer | Vertical Autoclaves | Wisconsin | |
| 24 Hour // 7 Day Service // Call Toll Free 1-888-EXT-STER-ilizer // 1-888-398-7837 International Callers 1-631-608-3076 No Voice Menus...No Voice Mail Just LIVE Fast Help...Click HERE to eMail |