The Midmark M7 self-contained steam autoclave
makes sterilization quick and efficient.
Click for BEST PRICE
The fastest and most efficient autoclave
available!
Prevent “dry burning”
Low water cut-out switch prevents “dry burning”.
The M7 will operate only when there is enough water
present, which prolongs the life of the heating
element.
A pilot light is on when the heater is on and rotates
off and on during normal cycle.
Reset button saves time.
It restores operation after the cut-out switch is
tripped and you have added water.
The cycle timer regulates steam time from 0 to 30
minutes and automatically turns the M7 off when
the sterilization cycle is complete.
This prevents over-sterilization thus extending the
service life of your instruments.
A safety door protects the operator.
It automatically seals when pressurized and will not
allow the operator to open the door until the
chamber is safely depressurized.
The temperature regulator allows the operator to
preset the temperature at a desired setting between
250˚F (121˚C) and 270˚F (132˚C).
This control, acting as a thermostat, cycles the
heating element on and off.
A temperature gauge:
Indicates the temperature inside the chamber.
The gauge is graduated in two-degree increments
from 80˚F (26.7˚C) to 270˚F (132˚C).
Front Draining Feature
With our front draining feature, it’s easy to clean
and maintain. All controls and information are on
the front and easily accessible to the operator.
makes sterilization quick and efficient.
Click for BEST PRICE
The fastest and most efficient autoclave
available!
- At only 11 1/2 minutes from a cold start, you
won’t find a faster conventional autoclave
than the Midmark M7 SpeedClave®. - Starting hot, the M7 sterilizes unwrapped
instruments in just 9 minutes! - And, with constant improvements and new
technology, the M7’s reliability just keeps
getting better. - It meets U.L. 61010A-1 requirements.
- This self-contained unit sterilizes wrapped or
unwrapped instruments, linen packs and
glassware. - No plumbing is required as the M7 has its own
reservoir for distilled or demineralized water. - For added convenience, we’ve included three
corrosion-resistant, stainless steel trays. - It’s also economically priced, making it not
only the best, but the best product for your
money.
Prevent “dry burning”
Low water cut-out switch prevents “dry burning”.
The M7 will operate only when there is enough water
present, which prolongs the life of the heating
element.
A pilot light is on when the heater is on and rotates
off and on during normal cycle.
Reset button saves time.
It restores operation after the cut-out switch is
tripped and you have added water.
The cycle timer regulates steam time from 0 to 30
minutes and automatically turns the M7 off when
the sterilization cycle is complete.
This prevents over-sterilization thus extending the
service life of your instruments.
A safety door protects the operator.
It automatically seals when pressurized and will not
allow the operator to open the door until the
chamber is safely depressurized.
The temperature regulator allows the operator to
preset the temperature at a desired setting between
250˚F (121˚C) and 270˚F (132˚C).
This control, acting as a thermostat, cycles the
heating element on and off.
A temperature gauge:
Indicates the temperature inside the chamber.
The gauge is graduated in two-degree increments
from 80˚F (26.7˚C) to 270˚F (132˚C).
Front Draining Feature
With our front draining feature, it’s easy to clean
and maintain. All controls and information are on
the front and easily accessible to the operator.
Specifications
Overall length w/plug: 19" (48.3 cm)
Overall width: 14" (35.6 cm)
Overall height: 13" (33 cm)
Countertop area:
Minimum depth 16.5" (41.9 cm)
Chamber:
7.5" diameter (19.1 cm) 15" depth (38.1 cm)
2.4 gal. usable volume (9.0 liters)
Trays:
Two large - 5.62" W x 12" L x .88" D (14.3 cm x 30.5 cm x 2.2 cm)
One small - 4.12" W x 12" L x .88" D (10.5 cm x 30.5 cm x 2.2 cm)
Unit weight: 30 lbs. (13.6 kg)
Shipping weight: 34 lbs. (15.4 kg)
Water reservoir capacity: 1.31 gal. (4.9 liters)
Electrical Requirements
115 VAC, 60 Hz, 10 AMPS Single phase
115 VAC has 1136 watt tubular immersion heater
UL61010A-1 and CUL listed
CAN/CSA C22.2 No. 1010
230 VAC, 50 Hz, 5 AMPS Single phase
A separate (dedicated) circuit is recommended for this sterilizer.
Installation
Use on Formica®, stainless steel or stone surface.
Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill reservoir and for
cooling processed trays.
Overall length w/plug: 19" (48.3 cm)
Overall width: 14" (35.6 cm)
Overall height: 13" (33 cm)
Countertop area:
Minimum depth 16.5" (41.9 cm)
Chamber:
7.5" diameter (19.1 cm) 15" depth (38.1 cm)
2.4 gal. usable volume (9.0 liters)
Trays:
Two large - 5.62" W x 12" L x .88" D (14.3 cm x 30.5 cm x 2.2 cm)
One small - 4.12" W x 12" L x .88" D (10.5 cm x 30.5 cm x 2.2 cm)
Unit weight: 30 lbs. (13.6 kg)
Shipping weight: 34 lbs. (15.4 kg)
Water reservoir capacity: 1.31 gal. (4.9 liters)
Electrical Requirements
115 VAC, 60 Hz, 10 AMPS Single phase
115 VAC has 1136 watt tubular immersion heater
UL61010A-1 and CUL listed
CAN/CSA C22.2 No. 1010
230 VAC, 50 Hz, 5 AMPS Single phase
A separate (dedicated) circuit is recommended for this sterilizer.
Installation
Use on Formica®, stainless steel or stone surface.
Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill reservoir and for
cooling processed trays.
| The Midmark M9 UltraClave® Automatic Sterilizer Today, more than ever, you need reliable and easy to use products from a trusted partner who understands your sterilization needs. Chamber: 9" diameter (22.9 cm) x 15" depth (38.0 cm) |
| The Midmark M11 UltraClave® Create peace of mind by making the healthcare market’s leading autoclave Chamber: 11" diameter (28 cm) x 18" depth (46 cm) |
 | |  | |  | |  | |  | |  | |  |
| Midmark Speed~Clean Autoclave Cleaner Click HERE to Order |
 | |  | |  | |  | |  | |  | |  | |  |
| | HOME PAGE | All American | Barnstead | Castle | ChemiClave | Delta XL | Harvey | | Hirayama | Hospital Sterilizers | MagnaClave | Market Forge | MDT | Midmark | | Pelton & Crane | Prestige | Ritter | Statim | Tuttnauer | Vertical Autoclaves | Wisconsin | |
| 24 Hour // 7 Day Service // Call Toll Free 1-888-EXT-STER-ilizer // 1-888-398-7837 International Callers 1-631-608-3076 No Voice Menus...No Voice Mail Just LIVE Fast Help...Click HERE to eMail |
| MIDMARK...is one of America's most popular Sterilizer Manufacturers. Their products are easy to use and durable. ~~~~~~~~~~~~~~~~~~~~~ We searched the Internet for MIDMARK Prices and... ...can certainly do way better than anyone...even the Discount Houses! ~~~~~~~~~~~~~~~~~~~~~ We NEVER share your contact information with anyone and... ...we NEVER push anyone for a sale, because... We KNOW we can always get you better pricing, better service and better terms than our competition. |
////////////////////////////////