Market Forge Used Sterilmatic Model STM-E STM-EL Large Sterilizers Web Sterilizers

Previously~owned Sterilmatic STM-E & STM-EL Sterilizers
The compact sterilizer that does a big sterilizer job.
This little sterilizer has as much inside capacity as many large, more costly conventional sterilizers
and up to five times the capacity of smaller tabletop units.

IMPORTANT NOTE: The following statements were true for the sterilizer
pictured to the right...but every detail of each purchase of pre-owned
equipment is negotiated separately.

Market Forge Sterilmatic STM-EL Laboratory Sterilizer
DETAILS:

Model: Sterilmatic STMEL
Adjustable sterilizing temperature from 110 to 121°C (230 to 250°F).
Fast preheat time: reaches 121°C (250°F) in less than 10 minutes
Features fast exhaust for instruments and glassware and slow exhaust
for liquids
Heating elements on the outside of the sterilizer chamber never come in
contact with water
Drainage is made via an exterior valve
Safety features include low water cutoff with reset and warning light, a
safety relief valve, and a self-sealing door prevents opening during the
cycle
Stainless steel stand
ASME-approved
Chamber size: 26 x 16 inches
Temp range: 110 to 121ºC (230 to 250ºF)
Temp display: dial gauge
Pressure display: dial gauge
Timer range: 0 to 60 minutes
Reservoir capacity (Liters): 5.7
Chamber construction: aluminum
Operations Manual and Documentation
Power: 240VAC, 3PH

VINTAGE: 2000
CONDITION:

Excellent Condition Guaranteed
Fully Reconditioned to Factory Specifications by Expert Technicians
3 Month Warranty and Full Specification Guarantee
30 Day Right of Return

Our Reconditioning Process

We are totally focused on providing you with high quality reconditioned
equipment, wherever you are in the world.

We know how important it is for you to make the right investment decisions
and we understand that the purchase of a piece of new equipment is not
always feasible with tight operating budgets or timelines. Purchasing
reconditioned equipment allows for savings up to 60% while providing the
same quality and performance. If you are not ready to buy new, choose the
very best alternative to ensure quality and performance: a reconditioned
system re-built by Experts..

Every system we supply undergoes a stringent series of checks. The
reconditioning is carried out by our qualified engineers and technicians to the
most exacting standards. After an initial inspection, each machine is cleaned,
reconditioned as required and tested to ensure manufacturer’s specifications
are met. Whenever any parts are replaced, only factory approved parts are
used. The result of this process is a high quality machine that will provide
years of service to you.

As illustrated below, our reconditioning process delivers a warranted and
approved piece of equipment to your facility.

Receiving and Preparation

Initial cleaning and preparation.
Initial functional and cosmetic inspection.
Disassembly as necessary and testing of major components to sort and
select acceptable parts/assemblies.
Components and assemblies sent to repair areas for servicing, as
applicable.

Reconditioning

Replacement, Rebuilding or Refurbishment of components and
assemblies, as appropriate.
Housings and covers reworked or painted, as appropriate
Thorough detail cleaning of complete system.
Replacement of worn mechanical parts with good parts (only factory
approved parts, new or rebuilt).
Functional testing to factory specifications per recommended
diagnostics and procedures.
Application software testing as appropriate.
Full functional testing of system.

Quality Control and Shipping

Final functional testing documented (video/pictures).
System deinstalled and made ready for packing/crating (all assemblies
locked down and secured).
System packed: All components bubble wrapped individually. All parts
labeled clearly.
Professional crating of system. Each crate includes a floating base, tip-n-
tell devices, and shockwatch devices inside and outside of crate.
Equipment is vacuum barrier bagged for international shipments.
Shipping arrangements made with approved shipping company
(approved companies have extensive experience transporting sensitive
electronics equipment worldwide while at the same time providing very
competitive pricing).
Shipping documentation provided; Shipment confirmation email sent
with applicable tracking info.
All shipments are fully insured.

Before you purchase a Previously-owned Sterilmatic Sterilizer,
you need to know the difference between Models STM-E & STM-EL.
Model STM-EL has a temperature control knob and
the letter "L" stands for "Laboratory."
Model STM-E simply has a timer knob.
If you find a Model STM-EX & STM-ELX...the letter "X" stands for "Export."
The Export Models have different electrical requirements.

Click Image to Enlarge

We Just Sold the Sterilmatic Sterilizer
detailed below & pictured to the right.
Our customer couldn't be happier!!!
In order to make YOU happy...You have to
make the first move and call Pete Hampton
Toll-Free & DIRECT at 1-888-398-7837

24 Hour // 7 Day Service // Call Toll Free
1-888-EXT-STER-ilizer // 1-888-398-7837
International Callers 1-631-608-3076
No Voice Menus...No Voice Mail
Just LIVE Fast Help...Click HERE to eMail

Simply Sterile...If your hospital or laboratory is wasting time cleaning equipment -- or worse,
wasting money on disposable tools, it's time to consider the Market Forge Sterilimatic.
With the ability to sterilize everything from simple glassware and rubber gloves to flasked solutions up
to two liters in volume, the Sterilimatic is the perfect companion to any well equipped work area.
Operating at 15psi, the Sterilimatic features a switch for instruments or liquids, and simple operating
instructions

Click Image to Enlarge